Proper steps to take blood pressure

Secure the cuff Slide the cuff onto your arm, making sure that the stethoscope head is over the artery when using a manual monitor. This means that the measurement is complete. When using a manual monitor, the cuff may be marked with an arrow to show the location of the stethoscope head.

Your BP is higher or lower than your healthcare provider has told you it should be. At this point, you should not hear your pulse in the stethoscope.

This will be the diastolic reading. Keeping your eyes on the gauge, slowly release the pressure in the cuff by opening the airflow valve counterclockwise.

Blood Pressure Measurement

High BP increases your risk for stroke, heart attack, or kidney disease. Sphygmomanometers There are three types of sphygmomanometers used to measure blood pressure: If you are anxious or uncomfortable, this will make your blood pressure rise temporarily.

What is blood pressure? If you are using a wrist cuff, wrap the cuff snugly around your wrist.

Checking Your Blood Pressure at Home

A quality stethoscope 2. Take two or three readings, each about two minutes apart, and then work out the average. In some patients the Korotkoff sounds disappear as the systolic pressure is bled down.

An appropriately sized blood pressure cuff 3. Typically, blood pressure is higher in the mornings and lower in the evenings. Locate your pulse Locate your pulse by lightly pressing your index and middle fingers slightly to the inside center of the bend of your elbow where the brachial artery is.

The second or bottom number is called diastolic BP.

Checking Your Blood Pressure

If pulse sounds are heard right away, inflate to a higher pressure. Low BP may decrease blood flow to your organs, such as your brain and kidneys. Rapidly inflate the cuff to mmHg. Do not check your blood pressure within 30 minutes of smoking, drinking coffee, or exercising.Is your doctor measuring your blood pressure right?

Learn about the proper technique that is essential in accurately managing hypertension. Sometimes your doctor will take your blood pressure while you are reclined or while you are standing up. This is appropriate in certain cases, but he should also be measuring your blood pressure.

How To Take A Blood Pressure

Your blood pressure can be taken with a mercury blood pressure gauge, an aneroid manometer, or an electronic device for measuring the blood pressure, as long as the device has been recently calibrated and validated. To take the reading, follow these steps: 1.

Leaving the cuff’s lower edge about an inch above the bend of the elbow. A cuff that is too big will cause a falsely low blood pressure. Do not take a BP reading in an arm that is injured or has an IV or shunt.

Do not check your blood pressure within 30 minutes of smoking, drinking coffee, or exercising. Jun 13,  · How to Take Blood Pressure Manually. If you or someone you know is at risk for high or low blood pressure, you may want to invest in a manual blood pressure kit for home use.

Learning how to take your blood pressure manually may take a %(12). Blood Pressure – Making a formal inference We often talk about a person’s “blood pressure” as though it is an inherent characteristic of that person.

In fact, a person’s blood pressure is different each time you measure it. There are a few simple steps that you can follow to be sure that you get an accurate reading of your blood pressure. Before you take your blood pressure reading 1.

Proper steps to take blood pressure
Rated 4/5 based on 99 review